COMETA | ARTIC | PUMA | LEON | SPEED | SPOT | Gamma PULSAR
Pulsar 13 HP | Pulsar 5,5 HP | Pulsar 5,5 HP C
Technical features: PULSAR 13 HP | PULSAR 5,5 HP | PULSAR 5,5 HP C
Range PULSAR AUTONOMOUS high pressure cleaner
Cold water
[ Download 
pdf - 
zip ]
PULSAR is a range of AUTONOMOUS cold water high pressure cleaners useful in all those working places where there is no electricity such as in the building industry
| Model | Pressure | Water delivery | Motor power | Feeling |
| PULSAR 150 | 150 BAR | 600 lt/h | 5,5 HP | HONDA Petrol |
| PULSAR 200 | 200 BAR | 900 lt/h | 13 HP | HONDA Petrol |
| PULSAR 180 | 180 BAR | 1260 lt/h | 13 HP | HONDA Petrol |
| PULSAR 250 | 200 BAR | 900 lt/h | 13 HP | HONDA Petrol |
• H.P. pump with 3 ceramic pistons on line from 11 lt/min – 150 bar to 21 lt/min – 180 bar and 250 bar – 15 lt/min
• Frame built in strong metal, black epoxy painted fixed with anti-shock devices. This system, together with the rubber wheel make the machine very silent and firm on the floor.
• Cover to protect the pump in STAINLESS STEELAISI 430
• HONDA petrol engine at 13 HP or 5,5 HP (according to the model), manual start. The motor is equipped with safety in case of oil low level. Automatic accelerator that increases the RPM of the motor by means of the gun on the service lance
• RPM reducer placed between pump and motor. It reduces the RPM of the motor from 3000 to 1500 as required by the pump. This device is very important because it allows to use pumps at low speed and therefore increases the machine life
• High pressure piston pump. Maximum temperature that can be stand during suction is 60° C
• 1500 RPM
• By pass valve and pressure adjuster
• Direct water entry to pump, through a stainless steel mesh filter
• High pressure hose, 10 mt long,
• Service lance 90 or 120 cm with automatic gun.
• Stainless steel water nozzle
• Frame built in strong metal, black epoxy painted fixed with anti-shock devices. This system, together with the rubber wheel make the machine very silent and firm on the floor.
• Cover to protect the pump in STAINLESS STEELAISI 430
• HONDA petrol engine at 13 HP or 5,5 HP (according to the model), manual start. The motor is equipped with safety in case of oil low level. Automatic accelerator that increases the RPM of the motor by means of the gun on the service lance
• RPM reducer placed between pump and motor. It reduces the RPM of the motor from 3000 to 1500 as required by the pump. This device is very important because it allows to use pumps at low speed and therefore increases the machine life
• High pressure piston pump. Maximum temperature that can be stand during suction is 60° C
• 1500 RPM
• By pass valve and pressure adjuster
• Direct water entry to pump, through a stainless steel mesh filter
• High pressure hose, 10 mt long,
• Service lance 90 or 120 cm with automatic gun.
• Stainless steel water nozzle